The characteristics of high-quality cloth shoes:
(1) Upper: The quality of the upper fabric is of great importance to the quality of the entire shoe. There is no weaving on the high-quality shoe fabric, and the surface is smooth and clean. Place the shoes in parallel on a well-lit counter to observe the sliver and grid uppers, which can be stripe-ended, and the squares are straight and straight, with uniform dyeing. Corduroy, velvet and other high quality vamps are reversed and uniform, dense and even. In addition, the helper and the folder are clean and free of dirt, including uniform evenly.
The tops of the high-quality cloth shoes are narrow and consistent, and the joints are placed on the back of the shoes. The mouth cannot afford to lift up the corners, do not wrinkle, and the forks are the same. The stitches of the upper stitches are even and tidy, not skewed, without jump stitches, missing stitches and the bottom line pulled out. For the joints of the two-joint shoes, the elastic mouth, the elastic seams of the shoes, is a double stitch back and forth, the heel of the shoe is stitched and stitched, and the seam is straight.
(2) Sole inspection: There are many kinds of shoes and they vary in thickness. In general, the cloth soles of high-quality cloths are firm and firm, and the needles on the Nadi are even and neat; the plastic bottoms are smooth and flawless, and in particular, there are no defects such as air bubbles or voids in the flexed parts of the forefoot. The needle code of the nanowire is uniform, the brake wire is tight, and the bottom groove is intact. If the shoes are repeatedly bent with both hands, the sole can be found to be moderately flexible and free of cracks.
(3) Shoe body and assembly: Some parts of the cloth shoes are hand-made, allowing a certain amount of error. Generally, the length of the shoe face of high-quality cloth shoes has an error of no more than 3 mm, the difference between height and shortness is no more than 2 mm, and the heel tag is no more than 3 mm. . Ears crab claws (ear fan), crab shell size. The tongue length is in line with the opening. The length of a fork with a smashed shoe matches the length of the fork. The heels are neat, beautiful, and evenly spaced. The sole wall is neat, and each part is suitable for eating.
Bad shoes features:
(1) Upper: The fabric of the inferior fabric is rough, with uneven stripes, and the wrinkles and yellows on the upper and the shoes. The stitches of the upper stitches are skewed, jumpers, and broken lines, and the heel of the shoes has eye-opening and dew-pointing.
(2) Sole: Insufficient shoes have soft bottoms, uneven thicknesses, and uneven stitching on the nano bottom. The bottom pattern of the plastic is rough, the bottom groove is broken, there are holes, marks, etc., and the shoe soles are bent repeatedly, cracks will appear.
(3) Shoe body and assembly, the length of the shoe face of inferior cloth shoes, the difference between high and low is obvious, visually obvious. The length of the tongue does not match the length of the mouth, the sole wall is skewed, the parts are inconsistent, and there are even places where they help.
lace fabric
Shaoxing Ruier Imp. & Exp. Co.,Ltd , https://www.pasatextiles.com