Announcement of bidding correction for the fire fighting and rescue equipment project in Lishui District

Serial number

name

Specification requirements

Quantity

unit

1

Fire helmet

★ Original imported European full-face helmet, weighing no more than 1500 grams. Double hull design for multiple protections. The cap is made of PA6.6 flame retardant glass fiber and is made of a resin coating resistant to high temperature and scratch resistant flame retardant. The built-in cushioning layer is made of high temperature resistant foam PU, and the cap can be freely adjusted between 51-65cm. The cap holder is made of NOMEX mesh, which is flame retardant and high temperature resistant. Double-layer cover design, made of high-strength and high-temperature resistant material; resistant to high-speed particle impact, the mask will not break and crack; 260 ° C high temperature, 5 minutes mask does not appear deformation and dripping phenomenon; mask transmittance is 70%. The shawl is made of fire resistant high temperature resistant aluminum foil and flame retardant high temperature resistant fabric. The helmet is CE marked and complies with the domestic GA44-2015 standard and CCCF certification.

The original authorization letter of the manufacturer for the project shall be provided at the time of bidding; an effective test report issued by the National Fire Equipment Quality Supervision and Inspection Center or a domestic 3C certificate shall be provided.

34

top

2

Rescue gloves

★Requires imported brand; in accordance with European EN388:2003, the general protection level of the gloves reaches 4/5/3/3, and the protection level of the palm and the tiger's mouth is 4/5/4/4. The basic materials of the gloves are fire-retardant and flameproof. The wear is resistant to tearing and has good flexibility; the back protection of the hand uses an elastic rubber anti-smash system module to cushion the external impact force. The palm part is made of anti-cut flame retardant material, which is highly wear-resistant, oil-resistant and non-slip. The wrist is made of mesh-type breathable material, which can effectively protect the wrist and the arm, and is ventilated and ventilated; it adopts wide velcro technology. The overall color of the glove is striking and easy to find and identify in dark environments.

The original authorization letter of the manufacturer for this project must be provided at the time of bidding, and the EU CE test report must be provided.

30

vice

3

Multifunctional fire water gun

★ Imported brands. 500 liters / minute 8.3 liters / sec) @7bar, the range is not less than 35 meters. Size: 242*228*97mm. The maximum working pressure is 16 kg and the weight is ≤ 1.76 kg. Made of new aluminum alloy materials. The flow automatically adjusts the tip. The gun switch adopts a slide valve design, and the 5-speed adjustment flow rate is 20?40?60?80?100. The head shot mode touch design, the head shot mode can be adjusted for DC, flowering, and spray. Rotate the gun head to turn off the FLUSH high pressure cleaning file. Water hose anti-winding interface.

The original authorization letter of the manufacturer for the project shall be provided at the time of bidding; an effective test report issued by the National Fire Equipment Quality Supervision and Inspection Center or a domestic 3C certificate shall be provided.

2

support

4

Multifunctional fire water gun

★ Imported brands. Direct foaming adjustable flow multi-function fire water gun: Open the integrated foam tube for direct foaming, and put the foam tube back into the water flow control. Rotating fire interface, stainless steel ball valve, DC/Flower/spray/flush function for quick conversion.

Flow adjustable 110.230.360.470L/MIN@7BAR Use the diameter adjustment ring to set the rated working flow (fourth gear), low foaming.

The original authorization letter of the manufacturer for the project shall be provided at the time of bidding; an effective test report issued by the National Fire Equipment Quality Supervision and Inspection Center shall be provided.

3

support

5

Double mouth moving water cannon

★ Imported brands. The flow rate of the water/foam gun cannon is not less than 5000 liters/min. The aluminum alloy titanium alloy folding bracket has a weight of ≤27 kg. Horizontal range: no less than 80 meters. The tilt angle is 35° to 90° and the horizontal is 254 °. The spray form is DC, flowering, spray type rotary gun head adjustment. Equipped with an automatic drain valve, the gun body and base can be separated and mounted to a fixed flange. Portable handle for easy handling. With foam tube.

The original authorization letter of the manufacturer for the project shall be provided at the time of bidding; an effective test report issued by the National Fire Equipment Quality Supervision and Inspection Center or a domestic 3C certificate shall be provided.

1

door